{
    "componentChunkName": "component---src-templates-article-js",
    "path": "/resources/blog/article/put-aerial-lift-inspection-records-on-the-lift/",
    "result": {"data":{"strapiArticle":{"id":"Article_50","title":"Put Aerial-Lift Inspection Records on the Lift","author":null,"content":"*QR-linked records give operators and supervisors faster access to daily checks, photos, open issues, and equipment history at the point of work.*\n\nCompleting an aerial-lift inspection is only half the recordkeeping job. Operators and supervisors must also find the record when someone reports damage, reviews an issue, or checks the equipment history.\n\nPaper forms, binders, and separate spreadsheets put distance between the lift and its history. A QR-linked record closes that gap by keeping the daily inspection record with the equipment.\n\n## A completed checklist may still be out of reach\n\nConsider a Genie S-85 boom lift assigned to a hotel project. Monday’s operator notes a worn tire on a paper checklist, then leaves the form in the trailer. Tuesday’s operator sees the tire but has no access to the earlier note. By Wednesday, the safety manager wants to know when the damage was recorded and what happened next.\n\nThe checklist exists, yet the handoff failed.\n\nDaily records work best when operators complete them at the equipment and supervisors retrieve them without tracking down a clipboard. Dates, photos, location, inspection notes, and follow-up entries also need to remain tied to the correct machine—not mixed into a folder covering every lift on the project.\n\n## Recent OSHA records show the stakes\n\nOSHA addresses construction aerial lifts under [29 CFR 1926.453](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.453). General-industry requirements for vehicle-mounted elevating and rotating work platforms appear under [29 CFR 1910.67](https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.67). Documentation forms one part of the larger job, alongside sound equipment, trained operators, fall protection, and safe operating practices.\n\nRecent enforcement and investigation records show the range of hazards around this equipment:\n\n- In February 2024, OSHA documented workers standing on the mid-rail of an elevated aerial-lift basket. OSHA issued a serious citation under its aerial-lift construction rule and listed an initial penalty of $2,765.\n- An October 2024 OSHA investigation describes a worker falling about 30 feet from an aerial lift while preparing for a bridge concrete pour. The record lists a serious fall-protection citation and a willful reporting citation.\n- OSHA’s accident database lists additional aerial-lift-related fatal investigations from 2024 and 2025.\n\nThose cases do not show that recordkeeping alone prevents an incident. They show why equipment condition, operator practices, identified hazards, and follow-up need consistent attention.\n\nCDC/NIOSH provides broader context. From 2011 through 2014, [1,380 workers were injured and 87 died](https://www.cdc.gov/niosh/falls/aerial-lift/index.html) while operating aerial or scissor lifts. Falls from one level to another accounted for 360 injuries and 48 deaths during that period.\n\n## What changes when the record stays with the lift?\n\nPoint-of-work access removes the search from the start of an inspection. Standing beside the Genie S-85, an operator scans its tag and opens that machine’s record on a phone. The prior entry appears before the operator adds a new inspection date, tire photo, and defect note.\n\nNext, the supervisor opens the same lift history and reviews the issue. That handoff is clearer than a text message paired with a form stored elsewhere, especially when equipment moves between crews or jobsites.\n\nManagers get a more usable fleet view as well. Instead of asking who has the sheet for Lift 12, they find that asset in a central list or map and review its entries.\n\nBetter access does not improve the quality of a rushed check. It gives the next operator and supervisor a direct way to find the completed record after the inspection.\n\n## How Slate Pages supports daily inspections\n\nSlate Pages gives each aerial lift a QR tag called a Slate. Scanning the tag opens that lift’s record on a phone or tablet. With the iOS or Android app installed, the scan opens the asset directly in the app; without it, the same tag opens a browser view. No account is required to scan and read. A team member using the app updates custom fields at the equipment, including text, dates, photos, location, URLs, and journal notes.\n\nSlate Pages offers vinyl or paper stickers, armor-coated PVC, and laser-etched anodized aluminum for harsher settings. Offline mode is available where jobsite service is unreliable. Back at the office, managers use the web Dashboard’s List and Map views to review equipment records. They also share a Slate as a web link that recipients open in a browser without an account—useful when a supervisor or reviewer needs access without another login.\n\n## What about workers’ compensation savings?\n\nWorkplace injuries carry a large direct cost. OSHA’s [Business Case for Safety and Health](https://www.osha.gov/businesscase) cites Liberty Mutual’s estimate that employers pay more than $1 billion per week in direct workers’ compensation costs for disabling, nonfatal workplace injuries.\n\nThat national figure covers workplace injuries broadly. It is neither an estimate of aerial-lift claims nor the savings produced by daily inspection records.\n\nAvailable research does not assign a specific workers’ compensation reduction to QR-based aerial-lift documentation. Potential savings depend on whether the full safety process identifies hazards and takes equipment out of service when needed. Crews must also correct defects and support trained operators. Clear records make findings and follow-up easier to retrieve, while a defensible savings figure requires the employer’s own claims history and results.\n\n## Start with one clear workflow\n\nUse this checklist to organize the record for each lift:\n\n1. **Identify the machine.** Tie the record to one numbered unit.\n2. **Choose the fields.** Include the date, location, inspector, condition notes, photos, and follow-up details required by your process.\n3. **Place a suitable tag.** Match its material to weather, abrasion, cleaning, and handling.\n4. **Set the review path.** Name who reviews defects and records the next step.\n5. **Test retrieval.** Ask an operator and supervisor to find yesterday’s entry while standing at the machine.\n6. **Check the fleet view.** Confirm that each assigned lift has a usable record in the Dashboard.\n\n## About Slate Pages\n\nSlate Pages is a QR-based asset record system for construction crews and other equipment-heavy field teams. Each Slate connects a physical asset to its digital record, giving operators access at the equipment and managers a web Dashboard for reviewing records across the fleet.\n\n## Make the record as mobile as the lift\n\nMap what happens after an operator finds a defect during the daily check. Identify who receives the finding, where the evidence is stored, and how tomorrow’s operator learns about it. If any answer depends on finding a binder or calling someone off-site, the record is too far from the lift.\n\nCompare that process with point-of-work access. Then choose one lift class and define the exact fields your crew needs before placing the first tag.","created_at":"2026-08-26T20:12:49.000Z","SeoTitle":"Aerial Lift Daily Inspection Records | Slate Pages","MetaDescriptions":"Improve aerial lift daily inspection documentation with QR-linked records that operators and supervisors can access at the equipment.","image":null,"tags":[{"title":"Construction"},{"title":"Inspections"}]}},"pageContext":{"id":"Article_50"}},
    "staticQueryHashes": ["2348158232","63159454"]}